To more accurately assist you, this site collects cookies that are not shared with any third parties.

Wind Generator Installation Accessories

Wind Generator Installation Accessories

Let us help you with everything you need to make your marine wind generator installation a breeze.  

  • Marine Corrosion Protection

    Galvanic Corrosion Inhibitor - 3.5 oz. Squeeze Tube

    $8.95
    Marine anti-corrosion prevention.  Prevents corrosion between dissimilar metals. Great for preventing corrosion and galling of fasteners and rigging.   If you have ever mounted stainless steel and aluminum parts together in a salt-water...
    ECK-TB
    $8.95
  • 10/3 Round Marine Tinned Cable Wire

    Round Profile 10/3 Marine Tinned Cable

    $2.53
    SOLD BY THE FOOT - 20 FOOT MINIMUM - Cut to length for your order, so no returns on this item. We offer a special round profile triplex 10/3 cable for our wind generator installations because round boat cables allow for much easier installation where...
    WR-10-3G
    $2.53
  • 3 Wire Locking Plug for MarineKinetix or other brand Wind Generator

    Wind Generator 3-Wire Locking Plug and Receptacle

    $38.50
    This high-amperage 3-wire locking connector allows a quick-disconnect of your wind generator or other high-amperage low-voltage devices for seasonal removal or access.    This plug and receptacle set is made for 12VDC and 24VDC connections,...
    MK-3-WIRE
    $38.50
  • Wind generator support stay base

    Wind Generator Mounting Pole Support Base

    $30.00
    Additional or replacement wind generator pole stay support base (QTY 1).  This is a high quality machined 316 Stainless Steel base, which connects to 7/8" (22mm) support stay tubing used for lateral support of a wind generator mounting pole. ...
    MK-STAY
    $30.00
  • 50 Amp Manual Reset Circuit Breaker

    $39.00
    50 Amp manual reset waterproof circuit breaker, with self-test button, and pre-installed SEMS nuts. Safely and conveniently solves the problem and nuisance of replacing blown fuses.  These high-amp, Type III circuit breakers are typically used with...
    CB-50A-42
    $39.00
  • Shown here are all of the wind generator pole mount components that are included in this kit - all hardware is 316 SS.

    Marine Wind Generator Mounting Kit

    $225.00
    This MarineKinetix wind generator mast mount kit includes the 316 Stainless Steel hardware you need to pole-mount a small wind turbine to your boat using your own mast and two 7/8" tube stays.   This kit includes all the hardware, minus the tubing...
    MK4-MOUNT
    $225.00
  • Drill guide for drilling tubing or pipe
Clamp NOT included

    Drill Guide for Drilling Stainless Steel Tubing

    $14.95
    These work great for bimini tubing, rails and tubing structures.     Simple tool allows you to drill straight holes in stainless or aluminum tubing every time.  Inserted metal guides are held at tight tolerances in a resin frame to...
    DG-1312
    $14.95
  • Cable Gland Clam

    Thru-Deck "Cable Clam" - Waterproof Gland Fitting

    $44.00
    If you are installing a wind generator, solar panel, radar, radio antenna, or other electrical accessory, you will need a thru-deck fitting to seal and protect the thru-mount. These are sometimes called cable clams or cable glands.   This...
    CG-CCX-S
    $44.00
  • Flat Profile 10/3 Marine Tinned Cable

    $1.60
    Priced by the foot.  Cut to length for your order, so no returns on this item. 10 gauge marine triplex cable (10/3) designed for easily rewiring AC circuits in your cabin, connecting shore power charge controllers or for wind generator...
    WF-10-3G
    $1.60
  • Step down butt splice connector 10-14 AWG

    Heat Shrink Step Down Butt Connector 10AWG to 14AWG

    $1.25
    A great solution for joining wires of different sizes.  In this case a heat shrink butt splice connector for joining 10AWG wire to 14AWG wire. A perfect solution when you wish to make long wiring runs using thicker cable, such as wind generator or...
    WC-14-10
    $1.25
  • Cristec Battery Monitor for Boats

    Cristec Advanced Digital Battery Monitor

    $499.95
    Cristec  battery monitor for 12 V, 24 V and 48V batteries.  Cristec part number JPNUMII-CPS3 The Cristec battery monitor is unlike any other battery monitor on the market, and is made specifically for the cruising sailor to monitor multiple...
    CR-CPS-3
    $499.95