Compact 12VDC Surface-Mount LED Dome Light with Switch for your boat or RV.
NOTE: We now offer this in a dual-color (white/blue) version as well.
A nice surface-mount fixture to mount under their T-Top, overhead console, or on the ceiling down-below
The internal warm-white LED lamp module and electronics are 100% sealed and weatherproof. The internal module is covered with a external white plastic trim bezel with a stainless-steel toggle switch. The LED dome light mounts with two (2) included screws using the two (2) included stand-off spacers. The stand-off spacers provide the perfect offset to allow for a snap-on outer trim piece, leaving a clean and sleek bezel without any exposed screws or mounting holes. The toggle switch mounted on the bezel is pre-wired, so there is just a simple 2-wire hook-up for the installer.
This dome light also features a special pearlescent diffusing lens, which eliminates the pinpoints of LED light common to many fixtures, providing a glare-free light output that is easy on the eyes. You'll find it much less harsh, and without the shadows and dark spots that are typical with LED lamps that are mounted at eye level. Its 2.2W of soft warm-white isn't overly bright, with the output equal to a 5 to 10W halogen, about 70 lumens. So, its a nice lamp for overhead use in a boat or RV.
The lamp is very compact compared to some dome lights, measuring only 90mm (3.5") in outside diameter and only 25.7mm (1") thick.
- Surface Mount
- Polycarbonate Shell
- 6 LEDs (Warm White)
- Glare-free lens
- 120° Beam Angle:
- Voltage: 12 VDC
- Warm White Color Temperature: 2900-3200K
- 70 Lumens
- 2.2 Watts
- EMI free and certified to CE EMC and EN60945