REPLACES YOUR INCANDESCENT BULB IN YOUR TRI-COLOR FIXTURE CONVERTING IT INTO AN ENERGY-EFFICIENT LED FIXTURE
You won't believe how much brighter your tri-color lamp can be until you try this LED bub. You will also use about 85% less energy. A big advantage on long night passages.
This is a 4W replacement LED bulb that is made specifically for Aqua Signal Tri-Color stack lamps. It has 36 high-powered LEDs arrayed on 3 faces, with distinct sector separators for the most accurate sector angles.
It features a double-contact indexed BAY15d base, and the red, green and white LEDs are aligned to match the alignment in the Aqua Signal fixtures.
While it may seem counter-intuitive to some, using separate red, green and white light gives the maximum output, and has a much higher intensity and transmittance than using a white light behind colored lenses. See our white-paper on this subject here.
This LED replacement bulb easily satisfies the output and visibility requirement for boats up to 20M (65 feet)
Fits Aqua Signal Tri Color Nav Lights and Combo Nav/Anchor Stack Lights. Replaces Aqua Signal 10W and 25W BAY15d base bulbs: Model 8646697, 2412278
|LEDs:||Color-coordinated 2835 emitters|
|Input Voltage:||10 - 30VDC (Integrated Constant Current IC)|
|Amperage:||0.34A at 12VDC|
|Beam Angle:||112.5°, 112.5°, 135°|
|Color Temperature:||Red, Signal Green, 6,000°K (Cool White)|
|Base Type:||BAY15d - Indexed Bayonet|
|Dimensions:||ø35mm x 68mm overall (H)|
NOTE: If using in a combination stack light which has both a tri-color (top) and an all-around anchor light (bottom), then we also suggest fitting the anchor light with an LED bulb as well.