To more accurately assist you, this site collects cookies that are not shared with any third parties.

High-Line LED Wall Sconce Fixture with Dimming

(1 review) Write a Review
  • LED Bulkhead Sconce Light - Nickel Finish Shown
  • LED Wall Light for Boats
  • Touch On/Off and Dimming


4W Yacht-Spec High-Line Wall Sconce LED Boat Lamp with touch-dimming (10-30VDC).

A compact and high-style LED wall light with integrated touch dimming.  It works great as a small area light when you need individually switched lamps on a wall, vanity, hallway, or bulkhead.  It is a fixed position lamp, meant to be mounted as an up-facing wall sconce lamp on vertical surface.  It does not freely articulate like our reading lamps do.

These super-efficient LED fixtures can be powered with 10-30VDC, so are made for use on 12VDC or 24VDC boats and RV's.  Can also be configured with an optional power-supply for home (120VAC) use on headboards, etc.

The high-powered 4 watt CREE LED produces 300 lumens of 2,900K warm white light, with a high color rendering index of >85 CRI.  This ensures a soft white tone, which won't wash-out the beautiful look of wood interiors and the like.  The output is similar to a 30W halogen lamp, but uses approximately 80% less energy, and lasts up to 50,000 hours.

This lamp is made of 100% non-corrosive materials, so it will maintain its beautiful finish for years, even on salt-water boats.

The lamp body, base, and mount, are all machined from solid aluminum alloy and brass, and unlike most boat and RV fixtures, there is not a single piece of sheet-metal on this lamp.  This gives the lamp a solid feel and a pristine chrome or nickel finish.  

There is also an integrated constant-current LED driver, with dimming, built right into the lamp base.  This assure the longest life, and gives it multi-volt capability.  A feature normally found only on lamps costing more than twice as much.

Simple to mount using two included screws.  Inner bracket is mounted to the wall, then the main lamp base is attached using a catch and a set-screw.   It is ready to wire to your boat's 12V or 24V (DC) electrical system via the two 6" wire connection pigtails.  

This lamp has a 2 year warranty, and is guaranteed by our experts to satisfy 100% or your money back.   This lamp is distinguishable from European OEM yacht lamps costing 3 times as much.

Specifications and features:

  • 10-30VDC Input
  • 4 Watts (0.32A at 12VDC)
  • CREE Warm White 2900K LED chip
  • Constant-Current integrated circuitry
  • Touch On/Off and Dimming (100%-20%)
  • Recalls last dimming setting
  • Draws 0.04A at 12VDC at lowest dimming level
  • Opal chalk-white glass frosted shade (open on top)
  • Heat sink base
  • Hidden screw fastener mounting (2 screws included)
  • Projects light from sides and top
  • IP20
  • Individually switched (no wall switch required)
  • Base Diameter: 2.5"
  • Overall Length (height): 6"
  • Maximum Width: 2.5"
  • Glass Shade Diameter: 2-3/8"

Note: These lamps use a capacitive touch 'soft' switch, so are meant to be switched individually.  Each lamp must be switched back on using the integrated switch in case of power interruption via a breaker or another switch.

View AllClose

1 Review

  • 3
    Nice, but better options are available

    Posted by Unknown on 27th Feb 2017

    The Sconce looks nice, but other than it being dim able, it lacks other features that other Marine Beam lights have. If you are primarily after its appearance, then its your light.
    However the three watt reading light looks just as attractive and can be turned to spotlight something like a book your reading, or turned to look up like the sconce and illuminate the overhead, like the sconce does. It also has a night light function that the sconce lacks. So for us the three watt reading light is what we will use in place of the sconce. They are both quality products. Heavy and well made, they have a substantial feel to them, they are not plastic and don't look or feel like they are

View AllClose