Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 5 - 9 and get $0.50 off
- Buy 10 or above and get $1.00 off
This drop-in back pin G4 replacement features two modes from the same bulb! It can function as either a Red bulb, for preserving night vision, or with a quick flick of your existing switch, it can morph into a high-output super-bright Warm White bulb. There is no need for 3-way switches, or modifying wiring, it just drops in.
When initially switched on, its output comes from the three center RED LEDs. This provides a nice soft red output that is more than enough to light to see really well down below at night. This red start-up mode is really handy to prevent the loss of night vision, and avoids disturbing others down below. It is your choice whether you want Red or Warm White, and the control is all done using your existing switches. Imagine being able to convert any light in your boat to a red output with just a quick flick of the switch.
No need for big double bulb fixtures and 3-way switches. This is all accomplished using a digital latching technique within the bulb's micro-processor electronics. The bulb senses each toggle of the switch and latches into the Warm White mode if the switch is toggled off-on within 3 seconds. To revert to Red mode is a simple off and back on with a 3 second delay.
- Voltage: 10-30VDC
- Wattage: 0.6W (Red); 1.6W (Warm White)
- Amperage (12V): 0.05 Amp (Red); 0.12 Amp (Warm White)
- Luminous Flux: 100 Lumens
- Beam Angle: 120°
- Dimensions: 32mm x 8.5mm (+pins)
- Replaces: Back Mount G4 bi-pin halogens
- Warranty: 2 years