Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 10 or above and get $1.00 off
This drop-in G4 bi-pin replacement features two modes from the same bulb!
Designed to add the features of an entire new fixture, this bulb has (2) separate light modes with an initial color and a momentary memory circuit. Whether you want a soft red or green light to avoid blinding white after dark or the option of a brilliant blue glow - this bulb will extend your lighting options without having to touch a single wire.
Imagine being able to convert any light in your boat to a colored output with just a quick flick of the switch. No need for big double bulb fixtures, strip lights, or 3-way switches. This is all accomplished using a digital latching technique within the bulb's microprocessor electronics. The bulb senses each toggle of the switch and latches into the secondary mode if the switch is toggled off-on within 3 seconds. Revert to the primary mode by turning off the circuit for >4 seconds. When initially switched on, the bulb defaults to the start color with either (3) colored LEDs or (6) white emitters. Using your existing switch, power off the light and flick the switch back on within a few seconds to enable the secondary circuit of over 100 lumens of white light (10W+ equivalent). Choose warm white for classic soft light or cool white for added brightness with Xenon/fluorescent coloring.
All bulbs are dimmable using modern PWM dimmers.
- Voltage: 10-30VDC
- Wattage: 0.6W (R/G/B); 1.3W (White)
- Amperage (12V): 0.05 Amp (R/G/B); 0.12 Amp (White)
- Luminous Flux: 110 Lumens (White)
- Beam Angle: 120°
- Dimensions: 32mm x 8.5mm (+pins)
- Replaces: G4 bi-pin halogen
- Warranty: 2 years