Product Description
OUR NEWEST NAVIGATION LAMP FOR 2020 - STAINLESS STEEL WITH EASY MOUNTING!
If you are looking for an easy and economical LED replacement for your old Aqua Signal or similar navigation light, then this USCG approved LED navigation lamp from Marinebeam is for you. It uses a mounting plate that will allow you to match up the mounting holes to many existing hole patterns, including Aqua Sgnal Series 41 & 50, as well as Perko and Hella. This will save you the effort of having to drill new holes ito mount this lamp.
This navigation light series features a stainless steel housing and a UV-resistant adapter mounting base (available in black or white) for a great looking upgrade to your current nav light setup. With simple mounting that lines up with many older fixtures --2 screws with a 50mm (1.97") horizontal pitch--retrofitting has never been easier! An internal waterproof connection and gaskets at the rear of the fixture makes installation as simple as removing the old fixture, attaching your wire connections, then mounting the new fixture to your existing plate.
A perfect LED replacement for old leaky, faded, and inefficient Perko, Aqua Signal, and Hella navigation light fixtures.
| LEDs: | (4 x 0.2W) Green + (4 x 0.5W) Red | |||
| Input Voltage: | 10 - 30VDC (Integrated Constant Current IC) | |||
| Wattage: | 2.8 Watts | |||
| Amperage: | 0.14A at 12VDC | |||
| Beam Angle: | 112.5° x 2 | |||
| Color: | Red (Port), Green (Starboard) | |||
| Dimensions: | 82.5mm (W) x 95mm (H) x 63.5mm (D) | |||
| Mounting: | (2) 4mm Screws - 50mm horizontal pattern | |||
| Wiring: | Waterproof Internal Connector for 16AWG | |||
| Certifications: | USCG 2NM, ABYC A-16, IP67 | |||
| Lifetime | 30,000 hours | |||
NOTE: Details above are for Bi-Color Model - also available in Port, Starboard, Steaming (3NM), and Stern
Direct replacement for Aqua Signal Series 41, 50, Hella 351709.
Product Videos
Custom Field
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
Stainless steel Nav lights
Lights are very well made and have molded silicone gaskets all around. Directions could be more detailed. Used these to replace old brass nav lights on Grand Banks 42.
-
SS Navigation Lamps
These units are very bright and look good. Beware the polarity marks are tiny and below the screw posts. I hope the SS covers stay on for a long time since they only snap on bt so far they are holding well.
-
Great Brightness
This lamp with clear lens is very bright compared to colored lens units. Green and Red bulbs in this unit produce very clear and bright light. Chrome cover protects and covers the connection screws. Adapter plate is specific to certain lights so count on using one existing hole for mounting. Otherwise very nice lamp.
