- Voltage: 10-30VDC
- Wattage: 0.6W (Red); 2.5W (Warm White)
- Amperage (12V): 0.05 Amp (Red); 0.21 Amp (Warm White)
- Luminous Flux: 145 Lumens
- Beam Angle: 120°
- Dimensions: 57mm x 57mm x 8.5mm thick
- Replaces: Bayonet Base 1141, 1142, 1156, etc.
G4 Halogen Bi-Pin Base
Wedge Base 194, 912, 168, 921, T10, etc.
- Warranty: 2 years
This drop-in bayonet LED replacement features two modes from the same bulb! It can function as either a red bulb, for preserving night vision, or with a quick flick of your existing switch, it can morph into a high-output super-bright Warm White bulb.
No need for changing out fixtures or wiring- imagine being able to convert any 5"+ dome light in your boat to a red/white without two bulbs and 3-way switches. This is all accomplished using a digital latching technique within the bulb's microprocessor electronics. When initially switched on, its output comes from the three center red LEDs. This provides a low intensity red output that is more than enough to see down below at night. The bulb senses each toggle of the switch and latches into the Warm White mode if the switch is toggled off-on within 3 seconds. Reverting to red mode is done by simply waiting more than 3 seconds after turning off the light.
Our unique 15-LED matrix is designed to fit perfectly in the standard 5" and 6" dome lights like those made by ABI, AAA, West Marine, and Cabin, among others. We offer it in all the standard bulb base styles, including Bayonet Single-Contact (BA15S), Bayonet Double-Contact (BA15D), T10 Wedge (W2.1x9.5d), Festoon (SV8.5), and Bi-Pin (G4). Custom bases or pigtails by request.The bulb features 3 Red and 12 Warm White triple-emitter SMD LEDs, along with a peel-and-stick foam mount backing that makes installation easy, even on concave or irregular surfaces. For curved surfaces, simply taper the edges of the adhesive foam backing to meet the shape of the housing. Our emitter board also has a special notch cut-out for the socket, so the bulb fits perfectly centered.
Works the same as our Red/White "Switchable" G4 Bulb.
19 Reviews Hide Reviews Show Reviews
I just replaced all the 12vdc light bulbs in my CR 38 with LED's. There are two that had dual bulbs, red and white and I figured that they would only be white now. I was happy to find that there was a red and white replacement . The toggling from red to white is a nice feature keeping it simple. Both the red and white are brighter that I expected. The installation was a breeze. It could not have gone better.
Great, bright light. One odd thing I've noticed is that upon turning the light on, there's a quick flash of white before it toggles back to red. Does not compromise the quality of the product.
Several places I needed red lights for night sailing, but only had a single fixture. Problem solved.
For anyone who sails (or motors) at night, these are awesome, allowing crew in the cabin to use low level lighting without robbing the night vision of the person at the helm.