Product Description
| LEDs: | (9) 2835 emitters | |||
| Input Voltage: | 10 - 30VDC | |||
| Wattage: | 1.5 Watts | |||
| Amperage: | 0.125A at 12VDC | |||
| Beam Angle: | 120° | |||
| Color Temperature: | 2,900°K (Warm White), 6,000°K (Cool White), Red, Blue | |||
| Lumen Output: | 120 Lumens | |||
| Base Type: | G4 Bi-Pin, 4mm spacing, 0.7mm pins | |||
| Dimensions: | ø23mm x 8.5mm (+pins) | |||
| Dimmable: | Yes - with PWM Dimmer | |||
| Lifetime | 30,000 hours | |||
Our most popular G4 LED replacement bulb. This 9-LED SMD Power Cluster's compact design fits even the smallest side-pin G4 overhead puck type fixtures common in most modern boats and RVs. This bulb uses the latest 2835 emitter technology, and has an output greater than a 10W halogen bulb. The warm white version has a beautiful color temperature that will compliment your interior woodwork.
Its Surface Mount Device (SMD) LEDs and proprietary PWM Constant-Current chipset give it remarkable output for its form-factor. This bulb's sophisticated electronics now feature transient voltage protection (protects from surges and spikes), an on-board PTCC thermal fuse, and EMI suppression, making it perfect for use on boats.
NOTE: The warm white version of this bulb features 9-LEDs, while the cool white and colored versions use 6 triple-emitter 5050 LEDs. This is a function of LED type, not output.
Picture above shows bulb mounted in an Aqua Signal recessed ceiling fixture found in many production boats.
Product Videos
Custom Field
Product Reviews
12 Reviews Hide Reviews Show Reviews
-
Great replacement for old style ceiling bulbs on my 2004 Beneteau.
I’ve purchased these bulbs in the past and have been very satisfied with the quality, brightness, easy installation and long life. The bulbs I just purchased are of equal quality.
-
G4 9-LED side mount
Tried many G4 LEDs in my Carver with very thin interior light fixtures. These are the only ones that replaced the halogens in the space provided. The Cool White is a terrific light in the salon and state rooms. Be aware there are diodes on the reverse side, so, they are not quite as thin as the face view implies.
-
G4 side mount led cool white
Two resistors/diodes mounted on the back not shown in photos. It did fit into thinnest light fixture imaginable on my Carver 396 salon and state rooms. Other G4 LEDs were too thick for the bezel to close. Great delivery, great looking light bluish light.
-
Works great
I have used and tried many 12 volt LEDs over the years. These are the best I have found. Good light output, and engineered to be safe at fluctuating voltages
